Key Features
NXDN Digital Air Interface |
AMBE+2 Vocoder for Natural Sounding Digital Voice |
Operates in NXDN Digital Conventional and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue) |
Digital Conventional and Digital Trunking Modes |
Multi-Site Digital Trunking, up to 60000 GIDs and 60000 UIDs per Network |
Multi-Site IP Network Compatible |
True 6.25 kHz channel spacing operation |
Includes Radio-To-Radio Mode (no repeater needed) |
IP54/55 and MIL-STD 810C/D/E/F/G Certification |
Supplied With
Belt Clip | Yes, KBH-12 |
Instruction Manual | Yes, English, Spanish, French, Italian, German, Dutch, Turkish & Greek |
PMR General Features
5-Tone Signalling formats | Yes |
Battery Saver Mode | Yes |
Battery Status Indicator | Yes |
Busy Channel Lock-out | Yes |
Calling Alert | Yes |
Compact Design | Yes |
Companded Audio | Yes |
Digital ANI Built-in | Yes |
DTMF Function | Yes |
Dual-mode Scanning | Yes |
Ease of Operating Use | Yes |
Emergency Call Function | Yes |
Emergency Key | Yes |
Emergency Advanced Motion Detection Function | Man-Down function as standard. And an optional Software Licence gives Dual-mode "Staff Safe" alerts triggered either by a pre-set time with no movement or a pre-set time of excessive movement |
Flash Upgradeable Firmware | Yes |
FleetSync/FleetSync II | Yes |
Internal VOX Ready | Yes |
Lone Worker Function | Yes |
Low Battery Warning | Yes |
MDC-1200 | Yes |
Motion Detection Function | Yes, Both the trigger angle and the trigger time can be pre-set |
Multiple Scanning Function | Yes |
Programmable Function Keys | 3 Programmable Function Keys |
Programmable TX/RX Indication | Yes, Switchable ON or OFF |
PTT ID | Yes |
QT (CTCSS) / DQT (digital) | Yes |
SelCall Function | Yes |
Single-Tone Encode, 2-Tone Encode/Decode | Yes, Requires FCC K-version firmware. May affect other functions - see your dealer for details |
Talk Around | Yes |
"Talk Back" Scanning Function | Yes |
Time-Out Timer | Yes |
Transparent Data Mode | Yes |
Voice Inversion Scrambler | Yes |
Voting Function | Yes |
Windows PC Programming and Tuning | Yes |
NEXEDGE Features
Auto-Roaming/Registration (Multi-Site Trunking Mode) | Yes |
Broadcast Call (Trunking Mode) | Yes |
Call Queuing with Priority | Yes |
Fail Soft Mode | Yes |
FleetSync/FleetSync II Including PTT ID Digital ANI (Analogue Mode) | In Conventional FM Mode |
FM Analogue Conventional Included | Yes |
GIDs Per Network (Multi-Site Trunking Mode) | 60000 |
GPS Location with Voice | Yes |
Late Entry (Trunking Mode) | Yes |
Message Trunked Mode | Yes |
Multi-Site IP Network Compatible | Yes |
NXDN Conventional Included | Yes |
NXDN Digital 12.5/6.25kHz Channel Spacing | Yes |
Over-the-air Alias | Yes |
Over-the-air Programming | Yes, Allows NEXEDGE radios to be re-programmed remotely |
Priority Monitor IDs | Yes, 4 IDs |
Radio Access Numbers (RAN) | Yes, 64 (Including "None") in Digital Conventional Mode |
Remote Group Add (Trunking Mode) | Yes |
Remote Stun/Kill | Yes |
Site Roaming (Digital Conventional Mode) | Yes |
Special Alert Tone Patterns | Yes |
Telephone Interconnect Function | Yes, Requires KTI-4 Interconnect and a Telco unit |
Transmission Trunked Mode | Yes |
UIDs Per Network (Multi-Site Trunking Mode) | 60000 |
Wide Area All Group Call (Multi-Site Trunking Mode) | Yes |
FleetSync Signalling Features
Emergency Status | Yes |
GPS Ack Request | Yes |
Group Calling | Yes |
Power On/Off Status Messages | Yes |
PTT ID & Emergency GPS Reporting | Yes |
PTT ID Digital ANI | Yes |
Selective Calling | Yes |
Short Text Messages | Yes |
Status Message Block GPS Reporting | Yes |
Status Messaging | Yes |
MDC1200 Signalling Features
Emergency Encode/Decode | Yes |
PTT ID Encode/Decode | Yes |
Radio check Decode | Yes |
Stun/Revive Decode | Yes |
Options
Choice of Optional Battery Packs | Yes |
GPS Speaker/Mic Option | KMC-48GPS |
MIL-SPEC speaker mic. with programmable controls | Yes |
Applicable Standards
R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166 | Yes |
R&TTE: EN301 166 | Voice & Data for 6.25KHz Digital |
EU Safety: EN60065, 60950-1, 60215 | Yes |
For use in the EU | Yes |
IP54 | Yes |
IP55 | Yes |
Measurement - EIA Standards | Yes |
Measurement - EN Standards | Yes |
MIL-STD 810 C/D/E/F/G | Yes |
Technical Specifications
Frequency Range | 400 - 470 MHz |
Number of Channels | 64 |
Number of Zones | 4 |
Channel Frequency Spread | 70 MHz |
Channel Spacing - Analogue - Wide/Mid/Narrow | 25 kHz/20 kHz/12.5 kHz |
Channel Spacing - Digital - Wide/Narrow | 12.5 kHz/6.25 kHz |
Antenna Impedance - 50 Ohm | Yes |
Battery Life | 5-5-90 with KNB-57L: approx 11.5 hours with KNB-56N: approx 8.5 hours with KNB-55L: approx 8.5 hours |
Frequency Stability | ± 1 ppm (-30 °C to + 60 °C) |
Operating Temperature Range | -30 °C to + 60 °C |
Operating Voltage | 7.5 V DC ± 20% |
Dimensions | With KNB-57L: 56 x 110.5 x 40.1 mm With KNB-56N: 56 x 110.5 x 43.8 mm With KNB-55L: 56 x 110.5 x 38.1 mm - Projections not included - |
Weight (net) | With KNB-57L: 325 g With KNB-56N: 400 g With KNB-55L: 300 g |
Receiver Specifications
Adjacent Channel Selectivity (Analogue) | 76 dB at 25 kHz 74 dB at 20 kHz 68 dB at 12.5 kHz |
Audio Output | 500 mW with less than 3% distortion. 8 Ohms Impedance |
Intermodulation (Analogue) | 65 dB |
Sensitivity (Analogue) - EIA 12 dB SINAD | 0.28 µV at 25 kHz 0.28 µV at 20 kHz 0.32 µV at 12.5 kHz |
Sensitivity (Analogue) - EN 20 dB SINAD | -3 dB µV at 25 kHz -3 dB µV at 20 kHz -1 dB µV at 12.5 kHz |
Sensitivity (Digital) | 3% BER: 0.32 µV at 12.5 kHz 0.25 µV at 6.25 kHz 1% BER: -1 dB µV at 12.5 kHz -4 dB µV at 6.25 kHz |
Spurious Reponse Rejection (Analogue) | 75 dB |
Transmitter Specifications
RF Power Output (High/Low) | 5 W / 1 W |
FM Noise (EIA) | Analogue: 45 dB at 25 kHz 45 dB at 20 kHz 40 dB at 12.5 kHz |
Microphone Impedance | 1800 Ohm |
Modulation Distortion | Less than 3% |
Modulation Limiting | Analogue: ± 5.0 kHz at 25 kHz ± 4.0 kHz at 20 kHz ± 2.5 kHz at 12.5 kHz |
Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz |