KAC-M1814
Compact 4-Channel Digital Amplifier
The Multi-Application KAC-M1814 Compact 4 channel Class-D amplifier with 400 peak power supports louder volume for Car, Marine and Motorsports users with low-noise. Plastic covered connector helps to keep out water and dust and the Conformal Coating provides vibration resistance and helps prevent the PCB from rusting. RCA Line-In terminal or Speaker Level Input, with Signal Sensing Turn-on, to connect any type of receiver. A.ch and/or B.ch Filter Frequency Control and Filter Switch to apply HPF / OFF / LPF. Bridgeable Connection. Pre-amp and Power-amp sections are separated to reduce radiation noise.
Key Features
4 channel digital (Class D) amplifier |
Maximum output power 400W |
4 x 45W @ 4ohm (CEA-2006 standard) |
RCA / Speaker level input |
Signal sensing turn-on/off |
Variable Low- & High-Pass filter |
Compact size (145 x 45 x 99mm) |
Conformal coating protection |
Amplifier Features
Class D Amplifier | Yes |
Full Range Digital Amplifier | Yes |
Load Capability | 4Ω Stable |
Maximum power output | 400W |
Rated power output (4Ω) | 45W x 4 (4Ω) |
CEA-2006 Compliant | Yes |
Low-pass Filter | Yes |
High-pass Fliter | Yes |
Switched Mode Power supply | Yes, Power MOS-FET |
Signal Sensing Turn-on | Yes |
Line in | 4 RCA / Speaker level |
Speaker level Input | Yes |
Die-Cast Aluminium Heat Sink | Yes |
DC cable Supplied | Yes |
Amplifier-Specifications
Rated power output (CEA-2006) | 45Watts RMS x 4 at 4 ohms and 1% THD |
Low-pass Filter | 50~200Hz (-12dB/oct) |
High-pass Fliter | 50~200Hz (12dB/oct) |
Input Impedance | 10kΩ |
Signal to Noise Ratio | 98dB |
Signal to noise ratio (CEA-2006) | 82dBa (Reference: 1 Watt into 4 Ohms) |
Frequency response (+0dB, -3dB) | 20Hz ~ 20Hz |
Operating voltage | 14.4V (11V ~ 16V allowable) |
Maximum current consumption | 15A |
Dimensions (WxHxD) | 145 x 45 x 99(mm), |
Weight | 0.7kg |
Unit weight in individual package | 0.99 kg. |